BH GSO ISO 20424:2023

Bahraini Standard   Current Edition
· Approved on 10 December 2023 ·

Fatty acid methyl esters (FAME) — Determination of sulfur content — Inductively coupled plasma optical emission spectrometry (ICP-OES) method

Biofuels
Including solid biofuels, liquid biofuels and biogas

BH GSO ISO 20424:2023 Files

BH GSO ISO 20424:2023 Scope

This document specifies a test method for inductively coupled plasma optical emission spectrometry (ICP-OES) for the detection of the sulfur content from 2 mg/kg to 21 mg/kg in fatty acid methyl esters (FAME).

NOTE 1 For the purposes of this document, the term "% (m/m)" is used to represent the mass fraction (µ) of the material.

NOTE 2 The method can also be used for the determination of concentrations outside the given limits. The precision statement, however, is only valid for the concentration range given in the scope.

NOTE 3 The method described in the document was tested with FAME derived from soybean oil and beef tallow. FAME derived from other feedstock, in particular aged oils, may behave different due to the different nature of sulfur compounds.

Best Sellers From Oil and Gas Sector

GSO 1180:2021
 
Gulf Standard
Automatic transmission fluid (ATF)
BH GSO 1180:2022
GSO 1180:2021 
Bahraini Standard
Automatic transmission fluid (ATF)
GSO 672:2010
 
Gulf Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).
GSO 1161:2021
 
Gulf Standard
HLP HYDRAULIC OILS

Recently Published from Oil and Gas Sector

GSO 1785-1:2024
 
Gulf Technical Regulation
Lubricating Oils for Internal Combustion Engines – Part 1: API Classifications of Lubricating Oils for Gasoline and Diesel Engines
GSO ASTM D6377:2024
ASTM D6377:20 
Gulf Standard
Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCR<inf>x</inf > (Expansion Method)
GSO ISO 15663:2024
ISO 15663:2021 
Gulf Standard
Petroleum, petrochemical and natural gas industries — Life cycle costing
GSO ASTM D5133:2024
ASTM D5133:20a 
Gulf Standard
Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique